Contacts
Address
Philippines, National Capital Region, Quezon City, Jordan Plaines Subdivision, 1613 Samuel Street, Barangay Santa Monica, Novaliches, Quezon City1123
Director
manager
Phones of enterprise
management
+63
When placing an order please inform the manager that you've learned the information on Allbiz! Thank you that you buy on Allbiz!
Internet
Site:
About enterprise
Delta Star Power Manufacturing. Corporation
Specializes in the Manufacturing and Rehabilitation of Distribution
and Power Transformers from 120/240V to 69000V, 3 to 20,000 KVA
capacities. It’s long and dedicated experience (established since
September 1983) primarily in the field of electrical transformers is a
confirmation to its trademark as “THE TRANSFORMER PEOPLE”.
In stock
The magnetic circuit consists of coil-rolled, none-aging, grain oriented silicon steel laminations which feature low core loss and high permeability in the rolling direction.
Group: Accessories for transformers
In stock
The insulation oil used is mineral oil. Its characteristics are as follows:
Specific gravity Flashpoint
Viscosity 37.8° C (100° F) Interfacial tension dynes/cm. Pour point
Dielectric strength 2.5mm Tano()25°C 100 °C Reaction Color Corrosine
Neutralization number (KOH mg/g.)
0.865-0.910 145 ° C...
Group: Accessories for transformers
In stock
The enclosures are made of heavy gauge steel and are degreased , cleaned, primed and finished with gray color weather-resistant enamel.
On ventilated designs, the side enclosures are constructed with drip-proof louvers, with lifting holes. This ensures heat dissipation easily. All ventilation...
Group: Transformers
In stock
Indoor / Outdoor Substation facilities General Servicing and Preventive Maintenance / Testing such as Oil Dielectric Breakdown Voltage Test, Transformer Turn-Ratio (TTR) test, D.C. high potential / leakage current test, winding resistance measurement, laboratory test, protective relay and metering...
Group: Transformer substations
In stock
Transformer cores are constructed with high grade, non-aging, grain-oriented silicon steel with high magnetic permeability and low hysteresis and eddy current losses. Maximum magnetic flux densities are substantially below the saturation point. The core volume allows efficient transformer operation...
Group: Power transformers
In stock
The two methods of mounting the primary and secondary bushings are cover mounting and side wall mounting. Conventional transformers are top-mounted while live front padmount transformer are side mounted and covered by a compartmental enclosure.
Both the primary and secondary bushings are of...
Group: Power transformers
In stock
Delta Star Dry Type Transformers are rated 600 volts and below
for supplying appliance, lighting, and power loads from electrical distribution
systems. Capacity ratings are available from 5 to 1500 KVA. Standard
distribution voltages are 480 and 240 Volts; standard load voltages are 480,
380,...
Group: Power transformers
In stock
Delta Star three/single-phase distribution transformers,
manufactured in accordance with NEMA standards, are economical
power equipment with advanced winding design features for reducing
no-load and load losses.
High-grade silicon steel is used for the core. Special treating...
Group: Power transformers